Are you looking for a way to protect your skeg or repair and replace an already damaged skeg? A SkegGuard by MegaWare is the solution you’ve been looking for.
Made from marine grade 316 stainless steel, this guard will protect your skeg from unwanted damage. If your skeg is already damaged, no worries, the SkegGuard can be installed on a lower unit with as little as 2 inches of skeg remaining and still protect it against being broken off completely. It will be stronger and much more affordable than welding and replacing a lower skeg.
With an extra reinforced wear tap across the bottom where the skeg is most vulnerable, a SkegGuard will provide the best protection available for your skeg. This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging.
The SkegGuard also has a drain hole installed on it to protect against corrosion and freezing that may happen in the winter or storage months. The drain hole will keep water from collecting and remaining stagnant, which is the culprit to any further damage.
Secured with self-locking hardware, the Megaware SkegGuard can be installed with common tools in less than 10 minutes, and will provide years of service and save hundreds of dollars in potential repairs.
The SkegGuard conforms to your lower unit to insure there is no discernable drag or compromise in performance. Made in the U.S.A., this product will be a great addition to any boat to help in preserving the skeg and overall look and appeal of your boat.
Features:
- 316 Grade Marine Stainless Steel (Mirror Polished)
- Wear Tap protects from any ramp damage
- Drain Hole to help against corrosion, stagnant water, and freezing
- Made in the U.S.A.
- Easy do-it-yourself installation takes less than 10 minutes
- Installs with as little as 2-3 inches of skeg remaining
- Won’t compromise performance
- Three year warranty
Easily installs! Click here for installation instructions
A video presentation by Ship Shape TV on how to install your SkegGuard. ... read more
Video Transcript
Take a look at how much metal is now missing off the skeg of this motor. The owner of this boat only has about an inch or two left, and that’s it! Hi – I’m David Shumway, president of Megaware Keelguard.
As a boater you worry about hitting something underwater, trees can fall along the shoreline and logs can surprise you as they travel downstream. Or with lower water levels, large rocks or chunks of concrete that once were too deep to be a problem, pose a dangerous threat.
Then there’s the accidental ramp dragging, or when parking, the skeg gets hit and bent. And this is why our company has designed a simple and economical solution to skeg repair. This is our Megaware SkegGuard. It is construction of high quality, marine grade 3/16th stainless steel with a mirror like finish that will withstand much more damage or abrasion than the traditional skeg that you stated out with.
Installing one is really easy. Simply slide it over the remaining part of the skeg using a rubber mallet if needed. You will need a minimum of about 1 or 2 inches of the original skeg to attach to. Once it’s lined up, simply drill two quarter inch holes in the skeg using the holes in the SkegGuard as your guide. Next, take the mounting hardware that is included with your kit, and with the alan wrenches, secure them into place. You’ll notice that the mounting hardware has already been pre dipped in a thread locker, ensuring that your new skeg guard stays secure.
You might also notice this skeg wear tab at the bottom of the skeg Guard. It provides additional strength and reinforcement where the skeg is most vulnerable. It also has a drain hole to keep water from collecting and becoming stagnant or freezing. And the SkegGuard is very affordable at less than 100$ it’s a lot less expensive than welding on a new skeg. and eliminates the heat that can be generated when welding.
Give your boat the edge. read less
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.