This product has been discontinued.
Swivl-Eze
White Nylon Bushing For Alum. - Swivl-Eze
Price: $7.95
Discontinued
Save: $0.64
(7% Off $8.59)
Part # SP201
(Discontinued)
Bushing for aluminum bases & posts

Measurements:

  • OD of tube 1 1/4"
  • ID of tube 3/4"
  • Over all length with flange is 2 1/2"
  • Average Customer Review for White Nylon Bushing For Alum. - Swivl-Eze
    Full StarFull StarFull StarFull StarHalf Star
    Based On 22 Reviews | Write Review
    Full StarFull StarFull StarFull StarFull Star
    White nylon bushings for aluminum fishing boat
    by Lee from Auburn, Alabama on June 20, 2016
    I was very satisfied with my purchase and the service, thanks boost !!
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty Star
    White nylon bushing for alum -swivil exe
    by Richard from Vassar, Michigan on April 12, 2016
    They worked perfect and the service was great .
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Perfect
    by Tristan from Dyersburg, Tennessee on March 06, 2016
    Fast delivery. Although the bushings are white instead of black like the picture shows, they fit like a glove with no modifications
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    SWIVL-EZE BUSHING
    by Kenneth from Medina, Ohio on October 12, 2015
    matched exactly, seems a bit more snug than older worn-out one, which makes me believe it was time change.
    (1 of 1 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Exactly what I need
    by Jason from Hermosa Beach, California on September 29, 2015
    Arrived promptly, high quality, fair priced, I'll definitely be shopping here again. And when I become rich and famous I'm gonna get me a big 'ol boat! )
    Was this review helpful?
    Full StarFull StarFull StarEmpty StarEmpty Star
    the photo is not what was received. This is the white piece inside of the pedestal risers.
    by Alan from Jacksonville, Florida on July 02, 2015
    the photo is not what was received. This is the WHITE piece inside of the pedestal risers. what i needed was the BLACK inserts for the pedestal plate, they are black not white. similar product just different diameter, slightly bigger. ground it down to make it fit, but after i hammered it in, the seat would not go into the hole. after all that, put in trash can.
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    just what I needed. perfect
    by Jill from Moses Lake, Washington on June 04, 2015
    worked perfectly
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Review
    by Charles from Fate, Texas on May 06, 2015
    The product was as advertised. However it did not fit the pedestal that I have. It needs to be wider to fit my swivel eze pedestal. One and a half inch opening.
    Was this review helpful?
    Full StarFull StarFull StarEmpty StarEmpty Star
    If you don't Have tools buy the brass.
    by Leon from Harrison, Arkansas on May 05, 2015
    This bushing is very difficult to install. If you don't have the tools to modify it, go with the brass bushing. I think this is for the seat post.
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty Star
    extra part not need for me, sorry
    by Richard from Ogallala, Nebraska on April 29, 2015
    not knowing if 3 sets were required. This one is NOT for a springfield seat. So 1 star is not fair for this #201, I just did not know how to get the right busing set for a springfield seat, so ordered all three bushings, but only need 2, and they worked GREAT to make the seats enjoyable to sit in again.
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty Star
    White Nylon Bushing
    by Ricky from Fayetteville, Arkansas on April 23, 2015
    These look as if they are exact replacements for my boat. Before removing old ones and installing these I made sure they fit the pedestal and the were tight but fit. Once I installed these they were actually too tight. Had to force the pedestal/seat into the bushing. At which time I could not remove it. I had to remove base and then drive out the pin. Then I removed the bushing. The bushing has raised runners which I removed these about 1/2 way up from the bottom, then reinstalled them. Now they are still tight but I am able to install and remove the seat. even though it is more work remove the ribs/ridges a little at time so you do not remove too much.
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    worked just fine , order was prompt
    by David from Cranehill, Alabama on April 07, 2015
    took A little bit of shaving, fit just fine.
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    thanks for the quick response this is how it should work
    by Boyce from Cooper, Texas on February 24, 2015
    your comments request is confusing is service your are looking for or general comments like the product is correct and worked well
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    nylon insert
    by Brent from Cordele, Georgia on June 08, 2014
    Product was not as pictured but fit perfectly.
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Just what I was looking for.
    by Wanda from Flat Rock, North Carolina on April 08, 2014
    The bushing was a little tight fit and makes it a little hard to pick the seat up for travel, however, it tightened the pedestal enough it took all the wobble out when fishing which is a good thing. Very pleased with the product.
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    nylon bushing
    by Danny from Stella, North Carolina on September 21, 2013
    Been looking to replace my damaged bushing with a home made device...it was great to find an exact replacement and a good price...thanx
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    White bushing
    by Ronald from Lexington, Kentucky on May 14, 2013
    Just what I needed to fix my pedestal. Took a little trimming but worked out fine.
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    good stuff
    by Dale from Pleasant View, Utah on November 28, 2012
    this insert came quick and works good
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Bushing
    by Wayne from Booneville, Mississippi on September 21, 2012
    Perfect fit, Just what I needed, and very fast shipping.
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Boat seat pedestal bushing
    by George from Waco, Texas on June 30, 2012
    Even though the description states white which conflicts with the picture, it did arrive as white and was the proper bushing for my Atwood seat pedestal
    (1 of 1 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty Star
    Bushing for swivel seat
    by Ralph from Highland, California on August 29, 2011
    very tight fitting and had to ream them out before I could use. But other than that great product
    (2 of 2 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    davepool
    by David from Memphis, Tennessee on July 31, 2011
    Photo doesn't match product, but the product is what I wanted.
    (1 of 1 people found this review helpful)
    Was this review helpful?
    Q:
    I need the black bushing that fits in the base plate?
    A:
    According to Attwood, for a 3/4" black bushing you will need #P340. For a possible special order please call the number at the top of the page.


    Q:
    I have a 1.77" pedestal. Is this the correct replacement bushing for this size pedastal? Do I need an adapter bushing to go with this part?
    A:
    This would fit with that type of pedestal, yes. As for the adapter bushing, it depends on what you intend to do with it.


    Ask a question
    Question & Answer Guidelines
    This product ships in 1 business day.
    Add to Cart and enter your Postal Code to determine the shipping charges.
    Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
    Standard Shipping Policies