Carver Industries
Support Pole w/Vent, 40" - 70"
Price: $48.39
Save: $34.85
(41% Off $83.24)
Part # 60002
This item is found in the following Product Families
Average Customer Review for Support Pole w/Vent, 40" - 70"
Full StarFull StarFull StarFull StarEmpty Star
Based On 106 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Boat cover
by Arturo from Hallandale Beach, Florida on February 16, 2021
Nice and good quality
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Support Pole
by Patrick from Tabor City, North Carolina on March 28, 2020
Looks good have not used boat in use
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Support pole is worthless
by Steven from Casco, Michigan on September 30, 2019
2 of the three poles we order were nearly impossible to put together. Forget being able to adjust them easily. Returned them with the cover that didn’t come close to fitting. I will admit that I did like the vent caps. Those were nice and I wish I could have kept them for the custom cover I am going to have made.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Good Quality
by a Customer from Hilton, New York on July 26, 2018
Quality is good fit and installed fine
(12 of 20 people found this review helpful)
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Did not receive it!!! And really need it!!
by Carl from Winchester, Tennessee on July 09, 2018
I can't track through UPS because your only giving me one tracking number and there has to be at least two boxes since my support poles would not fit in this box with boat cover!
(12 of 20 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Great support and vent
by Raul from Ludlow, Massachusetts on October 17, 2017
Works great as needed and vents interior under cover. Easy to install.
(12 of 21 people found this review helpful)
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Regarding: Support Pole w/vent, 40" - 70"
by Mary from Rogers, Texas on July 07, 2017
It would have been okay is the cover had a reinforced edge hole for the pole instead of making one that would damage the cover and produce a rough raveled edge. When purchasing this product we did not read that a hole would have to be made by the client.
(14 of 23 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Poles not long enough.
by Ron from Alexandria, Virginia on June 20, 2017
I have a 28 ft bow rider boat and the support poles are not long enough to be able to tent the bow and the cockpit area to keep water shedding off the cover. I had to use 3 poles out of the four just to tent the cock pit area. Now the one pole i have left is not long enough to be able to tent the bow area.
(12 of 18 people found this review helpful)
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
Did not know had to cut cover to install
by Scott from Norfolk, Massachusetts on June 09, 2017
Decent product if willing to cut hole in brand new cover (which I was not willing to do)
(12 of 20 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Vented pole for air flow
by Randall from Rochester Hills, Michigan on May 21, 2017
Helps provide some venting to relieve hot air buildup under cover.
(12 of 21 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Support Pole
by Andrew from Elk Grove, California on April 19, 2017
Good pole. Have had worse.
(12 of 22 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Base not adequate
by David from Raleigh, North Carolina on April 08, 2017
The pole itself is of high quality, and has a venting system on the top. However, the base is just a rubber cap and the pole relies on the weight of the cover to stay upright. The cover is just not tight enough on my boat to sustain the pole, even though I have the correct size cover. So, I built a base of wood and inserted the pole, which seems to work. This pole would be ideal if it had a tripod base, like a camera tripod, and I'd have paid more for something like that, if it was offered.
(12 of 22 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Almost great
by David from Raleigh, North Carolina on March 29, 2017
The pole assembly and cover attachment are of good quality. However, the rubber foot on the end of the base will not stand up under the cover by itself. I had to make a base to support it. Other than that, it's a good product.
(12 of 22 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Support
by Stephane from Terrebonne, Quebec on January 18, 2017
Qualite correct
(12 of 23 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Pole
by Stephane from Terrebonne, Quebec on January 16, 2017
Ok
(12 of 23 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
quality product
by Kent from Blaine, California on November 11, 2016
Easy to install, high quality, works well.
(12 of 21 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Good product
by Tom from Nampa, Idaho on October 31, 2016
I used 2 poles for my 16 foot and it seams to be working well at keeping the rain from pooling.
(12 of 23 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Four Winns boat cover
by Rolfe from Nyack, New York on September 27, 2016
So far I am satisfied with the cover. I have not put it on the boat yet. So I can update this after I do so. I very happy it is American made!
(12 of 22 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Worked great! was worried it might not fit, Boy was i wrong- Like a glove!!!
by Caleb from Cedar Rapids, Iowa on August 30, 2016
Amazing product, was extra padded in the right places, even fit over the trolling motor in the front of the boat! would recommend!
(12 of 22 people found this review helpful)
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
You Won't Give Me The Opportunity To Rate The Cover So I'll Do It Here
by Mark from Florence, Wisconsin on August 08, 2016
The cover you sent me was two feet to long and you want to charge me for your mistake. First, last and only time I use iBoats. Buy locale, It's cheaper and better in the long run. Good bye.
(12 of 21 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Vent pole
by Jennifer from Rothschild, Wisconsin on August 04, 2016
I figured with spending $300 on a boat cover, vent pole and straps that the boat cover came ready for the vent pole...unfortunately this is not the case and we have to cut our new $300 boat cover ourselves. This has yet to be done as any mistake will be very costly. Otherwise, I'm very happy with the product.
(12 of 22 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Get one
by Jason from La Vergne, Tennessee on August 02, 2016
No doubt these vent poles cut down on moisture under the cover when its hot outside.
(12 of 22 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Great company with super customer service
by George from Little River, South Carolina on July 27, 2016
I ordered a cover for my new Tracker boat because mine didn't come with a cover. The cover from iboats.com came in on a thursday and the following sa ay I got a package from Tracker saying that this was the cover which was supposed to be included in my purchase and had been inadvertently omitted. I am trusting that all goes well with the return of the unused iboat.com cover. I will definitely use them again and will tell others how customer friendly they really are.
(12 of 21 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Nice
by Jason from La Vergne, Tennessee on July 23, 2016
This vent pipe is ok. I just dont like cutting a hole in the cover even though its needed.
(13 of 23 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
crestliner boat cover
by Robert from Bishops Falls, Newfoundland & Labrador on July 17, 2016
great fits perfect.good quality
(12 of 22 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Support poles
by Ginger from Murphy, North Carolina on July 06, 2016
Great
(12 of 21 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Vented support pole
by Kendall from Knoxvile, Tennessee on June 20, 2016
I've had the vented support pole a few weeks, but haven't taken it out of the package. I imagine it will work like other poles I've had in the past and be a good product. What I'm not a fan of is having to cut the hole myself. I've done it with other covers and it's not an issue, but when paying top dollar for a customized cover and supports then it should be done for you.
(12 of 22 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Pontoon Supports
by Dale from Colville, Washington on June 01, 2016
I bought 2 for my 24' pontoon. works great. I do wish I would have bought the cinch kit with the cover. Instead I just use a rope to cinch tight around the bottom and the use support pole to make cover taunt and not puddle in the rain.
(12 of 22 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Boat cover and vented pole
by Arthur from Big Rock, Illinois on April 29, 2016
Cover fit very well and the vent pole was easy to install. 2 poles are really needed for this boat. I may order a second one
(12 of 23 people found this review helpful)
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
You want me to cut my new cover !
by Frank from Johnston, Rhode Island on March 21, 2016
I can't bring myself to cut a 2 1/2" hole in my new cover so I didn't Use the vent. In my opinion when a customer orders a cover and vent, then the supplier should cut the hole and hem it IMHO.
(12 of 22 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Hard to adjust
by Thomas from Bastrop, Texas on February 12, 2016
Vented cap works as advertised but the small pole piece does no fit well into the plastic adjustment clamp. Not really a big issue as the pole remains attached to the cover 99% of the time.
(12 of 22 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Well built product.
by Robert from Winter Park, Florida on January 25, 2016
I installed this item on our boat cover and it fit nicely. So far it provides enough air circulation to keep the mold down inside. It also provides a great insertion point for the expandable poles.
(12 of 24 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Seems to work well
by Chris from Colchester, Vermont on December 20, 2015
Seems like it will do well. It would be even better if there was a lip to make sure the hole in the cover was centered on th epost.
(12 of 21 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Vented pole
by Joanne from Little Burnt bay on November 10, 2015
Very easy to use
(12 of 21 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
I like how it permanently attaches
by Christopher from West Greenwich, Rhode Island on October 20, 2015
It was easy to install and the instructions are good. I really like having the pole permanently attached to the cover - it makes it so much easier to get it to stay upright.
(12 of 21 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Great product
by Michael from Hanover, Massachusetts on July 19, 2015
Easy installation with instructions. Keeps cover nice and tight to repel rain and other debris.
(12 of 23 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Plenty strong and flexible cannot tell about vent yet
by Tom from Acton, Massachusetts on July 14, 2015
Well built the pole has multiple sections joined with two "outter" tubes with detents in the middle so that worked fine. Vent requires cutting a hole in the cover, which will be fine because I need a way to stabilize the pole. I haven't decided on exact placement yet - still trying to find the right spot when used with a semi-custom cover I also bought here. I guess the vent will work it will allow a little air, but don't expect large volumes of air to move through this. Documentation OK - includes other products that if you haven't bought are a little confusing at first.
(12 of 22 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Vented pole
by Garrett from Lasalle, Ontario on June 10, 2015
Product is great
(12 of 21 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Satisfied
by Bruce from Penticton, British Columbia on June 03, 2015
I've not cut the hole in my cover yet, seems like it will work fine.
(12 of 21 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Part 60002
by Richard from Alexandria, Louisiana on May 11, 2015
no comments
(12 of 22 people found this review helpful)
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Didn't know about the hole
by Thomas from Carriere, Mississippi on March 08, 2015
I did not know that this product required me to cut a hole in my new boat cover. If I knew that in advance, I would have never bought this product. I tried to use it without cutting a hole but it falls over easily. I wasted $25.
(11 of 20 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Great item
by Timothy from Lake Placid, Florida on March 02, 2015
Hating cutting the hole in our brand new boat cover but it was worth it, great little vent and it helps the tarp to not hold rain..
(10 of 18 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
vented support pole
by Jerald from Ortonville, Michigan on November 08, 2014
Well made, detailed instructions for assembly and usage. Should do the job.
(10 of 18 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Vented Pole
by Thomas from Macclenny, Florida on October 29, 2014
Boat in maintenance shop. Have not used yet. Appears as advertised.
(10 of 18 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
A little light duty but it works
by Todd from Livingston, Louisiana on August 03, 2014
Not as heavy duty as it needs to be but will work ok I guess.
(10 of 19 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
vented pole
by Jon from Burlington, North Dakota on July 30, 2014
definitly recommend this product
(10 of 18 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Vented Support Pole
by Kenneth from Mustang, Oklahoma on July 09, 2014
The biggest issue I have is that the instructions for the product stink, other than the how to cut a hole into your new boat cover. You get a bag of poles and other parts with what appear to be two connecting pipes. I comes with snap connection pole (which was nice) since my cover had a snap-support sewn in.
(8 of 15 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
boat cover and vented support pole
by Thomas from Cary, North Carolina on March 31, 2014
I guess it was my fault..I ordered a new cover and a vented support pole...the cover came without a vent..so the pole is not able to be used. should this be flagged when the order is placed?
(8 of 14 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
vent poles
by Randy from Bethlehem, Connecticut on March 29, 2014
poles fit good
(10 of 17 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Good Quality Value
by Jeffrey from New London, North Carolina on March 06, 2014
The poles are well made and work well.
(8 of 15 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Vent
by Carl from Pensacola, Florida on February 07, 2014
Good product, meets the need for ventilation with boat cover installed, but be prepared to cut a hole in your boat cover to allow the vent tube installation.
(9 of 16 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Vented Support Pole
by John from Litchfield Park, Arizona on January 14, 2014
Didn't cut a hole in the cover to use the pole instead just inserted it in a boat seat mount and draped cover over it.
(8 of 16 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Nice quality and easy to install
by Stacey from Orland Park, Illinois on December 24, 2013
This is a great product to keep the boat cover elevated to help with keeping the rain running off of it. You do need to cut a hole in the cover which can be a little stressful for some.
(8 of 14 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
vented support pole
by David from Lexington, North Carolina on December 19, 2013
xx
(8 of 15 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Lack of explanation in Advertising
by Craig from Petaluma, California on November 25, 2013
Its probably my fault that I did not know that I would have to cut a hole in the new cover to install this vent pole. I assumed that when I ordered this that it would have been made for the hole in the cover and that the new cover would have been reinforced in the area of the cut hole. They just give you instructions of cutting the hole. No way am I going to cut a hole in my new cover and not reinforce it.
(8 of 14 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
boat cover vent
by Marvin from Sardis, British Columbia on November 24, 2013
I was very satisied.
(8 of 14 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Pole vent
by James from Spring Green, Wisconsin on November 08, 2013
It looks nice but I haven't installed yet! but I know it will work well
(8 of 12 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
support pole
by John from La Mesa, New Mexico on November 04, 2013
Installation was simple. I suggest a double thickness mounting location be provided on the cover. Also a mounting arrangement should be on the vent pole to assist with the support straps.
(8 of 15 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Vent pole
by Tim from Salem, Ohio on September 21, 2013
Vents good but the pole is kind of stupid, it comes in three pieces with two small extension pieces. Most poles are two piece with a locking lever. Just a stupid design.
(8 of 16 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Cover support
by Danielle from Duglasville, Georgia on August 31, 2013
Works great. So far so good!!
(8 of 13 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Small
by Ed from Marco Island, Florida on August 10, 2013
The pole is too small for my boat. The cover is great!!!
(6 of 10 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
boat cover
by Robert from El Mirage, Arizona on July 22, 2013
It was the wrong color but works good
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Vented Pole
by Robert from South Weymouth, Massachusetts on July 13, 2013
easy to instal
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
good idea
by Bob from Ayr, Ontario on July 08, 2013
A good idea. need to add a couple more without poles to vent while towing boat and trailer, stops the flapping. Could have been 6 inches longer to completely cover bow mount electric but not a major issue.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
a1
by Ian from Point Edward, Ontario on May 31, 2013
great
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
Disappointing
by Kurtis from Antioch, Illinois on May 30, 2013
The vent requires you to cut into your cover to mount it- which will prevent you from returning your cover if you want to. The poles that slide into the adjusting bottom piece dont fit right. They are too large and require a lot of work to get it into the base. After that they're almost impossible to get apart. The vent itself seems fairly heavy-duty, which is a good thing.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Works great.
by Jared from Houma, Louisiana on May 12, 2013
Easy setup and install by simply cutting a hole in the cover with the template provided.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Bimini cover
by Todd from Zachary, Louisiana on May 04, 2013
Fine
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Vented Support Pole
by Michael from Goodlettsville, Tennessee on April 10, 2013
The support pole was simple to install and works as advertised. was worried about cutting the hole in the cover but after using the template and following the great instructions, I am very pleased with the results. Thanks, iboats.com
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Poles do not fit together easily
by Ronald from Yuma, Arizona on March 19, 2013
This support comes in several pieces. They are intended to slip together. They are very hard to join. Had to ream to make them fit and then they are not easy to join.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Support pole
by Tom from Mill Spring, North Carolina on February 04, 2013
:)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Boat cover and ventilation pole
by Roger from Charlotte, North Carolina on January 06, 2013
I wasn't sure which product to buy so I Emailed the company. Peter Johnson responded and he was incredible. Walked me through everything and when I decided what I wanted he sent a link directly to order the right product. He was the best. I ordered all right before Christmas and they said that it would ship within 24 days. To my surprise - everything arrived before Christmas. All the way around excellent experience.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
17 ft MFG Gypsy Star cover and supports
by Beverly from Webster, New York on December 26, 2012
Our purchase was for both the boat cover (sized for a 17 foot MFG Gypsy Star) and the cover support system mentioned in this review. Since these items were purchased as a Christmas gift for my grandson there was a delay between purchase and the young boat owner becoming aware of "his treasure". As you might imagine he was extremely pleased and very surprised on Christmas morning. Both cover and support system must wait for winter to pass before they can be put to use since the boat is currently shrink wrapped to protect it from bad weather. We will re-review as soon as the items can be utilized. Perhaps you can guess that the time cannnot pass quickly enough for my grandson until he is able to get the boat back into the water.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Cover
by Ann from Tallahassee, Florida on October 05, 2012
fits like a charm
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
xxx
by Dannie from Nashwauk, Minnesota on October 05, 2012
xxxx
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
not sure.
by Rodney from Keizer, Oregon on October 04, 2012
I didn't use this because you have to cut a hole into a brand new cover. If you use the cover without the pole it sags from the weight of the vent. Save your money for something different.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
rock solid
by Ryan from Auburn, Indiana on August 09, 2012
built very well. Cam lock is very easy to operate.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Vented Support Pole
by John from Pensacola, Florida on August 06, 2012
The product is not worth buying it is to light and doesn't hold up
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
vented support pole
by Paul from Port st Lucie, Florida on July 17, 2012
Nothing wrong with product, just dont want to cut hole in new cover. Might start to tear
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
vent
by Michael from Spencerport, New York on June 20, 2012
easy to install
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Still contemplating the right placement
by Gary from Forestburgh, New York on June 06, 2012
I have 3 fiberglass bows for my new cover and have not yet determined the best location for this Vented support pole. Since my cover will be used when traveling I do have fears about cutting a hole in the cover and the possibility of weakening the material if I place it in the wrong spot.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
support pole
by Stephen from Lindsay, Ontario on May 25, 2012
Overall a good product. Took a bit to figure out how it works but after that it's been good. Smart idea! Would recommend to anyone who is looking or wants new support poles!
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
improvements
by Richard from Gatineau, Quebec on May 17, 2012
The system should include 2 20 inches horizontal poles stretching opposite from the centre unit to keep the middle of the tarp higher for better water shedding to the sides
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Great product
by Sheldon from Duck Key, Florida on April 22, 2012
It works exactly as described. It would be advantageous to have base on the pole
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
Endura cover pole kit
by Michael from Markham, Ontario on April 16, 2012
The pole with vent kit is well thought out but the manufacturing failed. The sliding adjustable poles do not slide inside each other. Just to close a tolerance to work. I used something else instead.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Vented Support Pole
by Earl from Wichita Falls, Texas on April 13, 2012
It’s what I expected and it’s a good idea. I would like a better base for the pole.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Great Products
by James from Morgantown, West Virginia on April 01, 2012
Very satisfied with the Support Pole, the Endura Cover and the tie-down kit!! Fits my boat well and easy to install.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
It Takes More Than One Pole
by Pedro from Brunswick, Georgia on March 05, 2012
The cover for my 27ft boat came with only one support pole and one set of 12 straps (the cover has 24 loops for straps). After the first rainfall I bacame painfully aware that only one pole, and one set of straps are insufficient to properly stretch the cover to prevent water from pooling on sections of the cover. The pooled water was so heavy that it bent and ruined the one pole. I determined it takes at least 6 poles, and a larger number of straps to properly prevent water from pooling. I begrudgingly purchased the additional poles and an additional set of straps.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
vented support poles-boat cover
by William from Fountain Inn, South Carolina on January 28, 2012
Awesome Product
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Vented Support Pole - Boat Cover
by William from Fountain Inn, South Carolina on January 28, 2012
Awesome product
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Boat Cover
by Stanley from Carleton, Michigan on January 23, 2012
Purchased this cover for my 1978 Mako 25' CC and it fit it like a glove. This is the best cover I"ve ever had for this boat. I would recommend this to anyone with a '78 Mako 25' CC
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
verry good
by Luc from Laval des Rapides, Quebec on November 13, 2011
fit good and good ventilation
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
Boat cover and center support with straps
by Lonnie from Elephant Butte, New Mexico on October 01, 2011
Center pole collapses and plastic tightner broke.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Vented Support Pole
by Thomas from Derby, New York on September 19, 2011
I was rather leary about cutting a hole in my brand new boat cover. I would have preferred it being done at the "factory", however I understand why it needs to be done after fitting the cover to the boat. It was easy! I took a deep breath, followed the simple instructions, cut the hole and put the fitting through. I was done. Works perfectly.
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
Vented Pole
by James from Boise, Idaho on September 11, 2011
A patch of fabric should be sewn in to reinforce the hole for the vent, which will add to the expense of the cover.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
disappointed
by Dan from Sandy Hook, Virginia on August 04, 2011
wish i had read reviews before purchasing this with my new cover, i was under the impression ordering them together the vent portion would be installed in the cover when it arrived....no chance i am cutting a hole in my new cover to use this
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Support
by David from Rogers, Minnesota on July 30, 2011
Works well with any cover.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
it should work
by Jeff from Ames, Iowa on July 20, 2011
I think this product is designed well. There are various options for installation, which is a must because this product works for a variety of different covers. It looks like it should be stable and allow for air exchange. Getting the hole cut in the right place in your cover will be the biggest challenge with this product.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Suport pole
by Austin from Joliet, Illinois on June 15, 2011
They could add a sticky ring to help this stay in place and seal better.
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Vented Support Pole- Endura Cover
by Kevin from Eaton, Ohio on June 13, 2011
I would highly recommend the vented support poles for the Endura Cover. I have a 19' bass boat and the vented support poles were very easy to install and worked great
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Did not use.
by Angelic from Chicago, Illinois on June 09, 2011
You needed to put a hole in the cover to use it and we could not see damaging something we just paid a lot of money for. Why not put a spot in the cover for the pole to go through?
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Cut a hole in my new boat cover ????? No way !!
by David from Grand Rapids, Minnesota on May 24, 2011
If this boat pole vent, requires the customer to cut their own hole, in their own brand new cover, how do you re-enforce the edges of the cut, to not fray over time ?? The cover should come with a plastic grommet in place, for the vent/pole to sit into. This is a huge waste of money, if every customer, has to do his/her own fabricating in order to make this work. What a joke. I thought this was a well thought out system, not a custom, DIY project. For all the money paying, should not have to be fabricating materials, to prevent fraying. If this is case, I guess I might be returning it all, and pay to get a custom cover, and vent system, even if twice as much. Worth it for time realization, in theory.
(7 of 7 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Review for Vented Support Pole - ENDURACover by Carver
by a Customer on July 06, 2009
Like the idea of the vented support. I'll have to reserve total judgement until I've trailer boat. Not really sure I want to cut a hole in my nice new cover.
(4 of 9 people found this review helpful)
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
Review for Vented Support Pole - ENDURACover by Carver
by a Customer on June 11, 2009
Not as will built that i thought it was.
(4 of 7 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Review for Vented Support Pole - ENDURACover by Carver
by a Customer on May 05, 2009
A must in damp/wet climates
(4 of 8 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Review for Vented Support Pole - ENDURACover by Carver
by a Customer on April 29, 2009
(0 of 7 people found this review helpful)
Was this review helpful?
This product ships in 7 business days.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies