Boats for Sale
Advice
Single Side Mount Standard - SeaStar Solutions
View Large Size
Single Side Mount Standard - Seastar
image is part # 309474
- Designed for unmatched simplicity, performance and reliability
- Dual function, single lever control
- For virtually all stern drive, outboard and inboard engines
- Easy installation without complicated modifications or tedious cable adjustments
- Entire Gear mechanism enclosed and permanently lubricated to reduce friction and ensure smooth operation
- Based upon rotary motion
- Features two widely spaced bearings
- Eliminates lever rock - slippage
- Control is adjustable in 15° increments creating 24 possible entry positions for horizontal through vertical installation
Average Customer Review for Single Side Mount Standard - SeaStar Solutions
Q:
Does the engine kill switch need to be mounted with the unit or, like in my 2005 Glastron, can it be mounted separately?
A:
It will need to be mounted separately. Kill switch cannot be installed onto this box.
Q:
Will this fit my vip with the volvo 5.0 engine inboard/ outboard?
A:
Yes, but you will probably want one with trim switch, part number 309474.
Q:
I have a1994 Larson cabrio 250 with a merc260 inboard would the 309475002 model work since i also have a trailer button on my old controller?
A:
Yes it will work as that has the tilt and trim function and this also accepts OEM cables.
Q:
Will this fit my 1994 Chaparral 220 Sunesta? It has the 5.0 MerCruiser i/o.?
A:
Yes it will work for your set up. However it does not have the trim switch, part number 309474 does.
Q:
Will this replace the US Marine side mount control on a 1989 Bayliner Capri Model 1950?
A:
Yes.
Q:
Would this control retrofit to my Suzuki DT9.9C 1989 Outboard motor on my sailboat?
Q:
I have a 2004 Four winns 264 funship. Will this control work for my boat?
A:
This product, like most of our other products on our website, is after market. It is made to fit based on the specifications of the mount, not the specifications of your boat. You will just need to verify the specifcations of the mount that you are replacing.
Q:
What cables do I need for a 1989 Johnson 9.9?
A:
If using OEM remote you need CC205 and the length you require. With this control box you need CC230 with CA27320P connection kit.
Q:
Will this fit on a 24 ft. 89 Bayliner Trophy?
A:
This is a universal remote box that accepts OEM cables. So yes you can install it on your boat and use your OEM cables. Be aware this particular unit (309473) does NOT have tilt or trim.
Q:
Will this fit on 1989 sea ray?
A:
Since it is an aftermarket we do not have original information to match it up. It accepts universal control cables along with Mercury and BRP (Johnson/Evinrude/OMC) OEM style cables. If you have further questions contact us at the number at the top of the page.
Q:
Will this work on my 1995 Cajun bass boat? Does it have the starter switch like the original control box?
A:
It is a universal remote box so it will work for your boat. It will not have the starter switch in the control box though.
Q:
Will this work on a 1979 Johnson seahorse 115hp?
A:
Yes as long as you use OEM cables.
Q:
Do you have install diagrams I have a 1984 bayliner trophy bass boat with oem cables for a force 85 hp, will they fit. my old control has 4 hole for the cables marked a,b,c,d?
A:
Yes we have that, just give us a call at the number at the top of the page and we can send you that.
Q:
My old controller has a "Trailer" button that raises the prop all the way up. The trim button only brings it up so far. Will SL-3 model allow for the "trailer" switch? Will I have to wire it up differently?
A:
The 309475002 has the tilt/trim switch that you're speaking of for the "trailer" switch.
Q:
Will this fit a 2000 tige boat?
A:
This is universal in its design and it accepts 33C series cables, or OMC/Mercury style cables.
Q:
Will this work with my 96 25 hp Johnson? And what cables do I need?
A:
This is universal in its design and it accepts OMC style cables, so you can use CC205-- and select the length you need.
Q:
Will this work on a 1996 force/mercury 120 HP OB?
A:
This is universal in its design and it accepts 33C series cables, or OMC/Mercury style cables.
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies
