High-Build 2056 Traditional Marine Varnish - Pettit Paint
- Recommended for the highest quality work
- Withstands severe weather conditions on salt or fresh water.
- Contains highest level of UV absorbers and light stabilizers for long-term gloss retention.
Similiar product to Bak-V-Spar Varnish 2053 but with a heavier build. Can build up the base with 20% less work than a traditional varnish. Contains all the benefits of UV protection and great durability.
General Description:
Considered the traditional standard in the marine industry, this varnish is highly regarded for its reliable service, versatile application and tough yet flexible durability. It is blended with phenolic resin and tung and linseed oils for excellent performance. It's warm, light amber hue will enhance the rich, classic brightwork appearance.
Easypoxy Hi-Build Varnish contains an ultraviolet light filter in conjunction with a hindered amine light stabilizer to screen the sun's damaging rays for longer life. Easypoxy Hi-Build Varnish has the highest build and film depth per coat, as well as excellent abrasion resistance and high gloss.
Hi-Build Varnish - Pettit Paint
Product Information | |
---|---|
Product Type | Exterior Varnish |
Key Attributes | •High-build varnish designed to be built up to many coats •Highest build and film depth per coat •High level of U.V. protection •Extremely durable finish •Easy to apply |
Gloss Level | High Gloss |
Coverage | 450 sq.ft/gal |
Technical Data | |
Technology & Formulation | Phenolic/Alkyd |
Substrates | Wood (For more specific instructions per substrate, please refer to the product data sheet provided below.) |
Application | |
Thinner | Brushing Thinner 120, Spray Thinner 121 |
Mixing of Product | For roll and tip application, thin 5-10% with 120 Brushing Thinnerto help maintain wet edge. For spray application, thin 15-20% with 121 Spray Thinner |
Method | Brush or Spray |
Application Temperature | 45°F - 90°F |
Number of Coats | Bare Wood: 5 Minimum Existing Varnish: 2 Minimum |
Recoating Information | DRY TIME(HOURS): Set-to-Touch / Tack Free / Dry Hard 90F: 1 - 3 hrs. / 3 - 5 hrs / 8 - 12 hrs 70F: 2 - 4 hrs. / 5 - 7 hrs / 12 - 20 hrs 50F: 4 - 8 hrs. / 12 - 16 hrs / 24 - 48 hrs (Must be sanded between coats) |
Repaint Information | If existing paint is well adhered: Clean and Sand. Old paint that is not firmly adhered to the substrate will have to be removed. |
Associated Products From Pettit Paint:
- 2027 EZ Wood Sealer
- 120 Brushing Thinner
- 121 Spray Thinner
- 7665 Dark Mahogany Paste Filler Stain
Hi-Build Varnish Product Data Sheet PDF
MSDS for Hi-Build Varnish*
*Disclaimer:Information on this material is subject to change without notice. Please visit the corresponding manufacturer's website for updates.