This product has been discontinued.
Hazardous materials:
This item has hazmat restrictions. Extra shipping charges may apply.
Pettit Paint
EZ-Poxy, Burgundy, Quart - Pettit Paint
Price: $52.95
Discontinued
Save: $20.04
(27% Off $72.99)
Part # 3626Q
(Discontinued)
Features:
  • Highest Gloss Topside Enamel
  • Tough, Weather Resistant Finish
  • Easy to Apply, Excellent Brushability
  • UV filters for superior gloss retention
  • Exceptional flow and leveling.

Easypoxy is a highly rated, one-part polyurethane topside paint improved by the addition of silicone for a brilliant shine and easy brushability. It also contains ultraviolet filters which enhance the already superior gloss retention and durability of polyurethane. This results in a topside finish that is exceptionally easy to apply and produces a lasting gelcoat-like brilliance, with a minimum of effort. Easypoxy is available in white and twenty-five popular topside colors.

All paint colors shown here are for guidance only. Due to differences in screen displays that are beyond our control, the colors on these pages cannot be guaranteed to match the actual color in the can.

General Description
Easypoxy is a modern polyurethane topside and deck enamel improved by the addition of silicone for brilliant shine and easy brushability. It has ultraviolet filters which enhance the already superior gloss retention and durability of polyurethane. The result is a topside finish that's exceptionally easy to apply, producing a lasting gelcoat-like brilliance with a minimum of effort. For a semi-gloss finish for decks and interiors use 3106 Easypoxy Semi-Gloss White or simply add 9080 Easypoxy Satin Additive to any Easypoxy color for a custom satin look.

Although not recommended for constant immersion, Easypoxy can be used on the bottoms of dry-sailed boats that will be in water no more than two days at a time. Allow the last coat of Easypoxy to dry a minimum of 7 days before launching when Easypoxy is used in this manner.

Application Information
Stir thoroughly before use. Easypoxy may be applied by brush, roller, conventional or airless spray. For brush or roller application apply without thinning although in hot weather 5-10% Pettit 120 Brushing Thinner may be added to maintain a wet edge. For best results on large, smooth surfaces roll out using a short nap roller followed immediately by leveling off with the tip of a brush. For conventional spray application thin 15-20% with Pettit 121 Spraying Thinner. Apply one, thin even coat per day. After an overnight dry, lightly sand with 220 grit sandpaper and apply a second coat. Applying two or more coats in one day or applying excessively heavy films (greater than 4 wet mils) will lead to insufficient through drying of the paint and will yield soft paint films. For airless spray application thin up to 5% with Pettit 121 Spraying Thinner. Utilize a .011-.015 inch diameter tip for application. Do not apply Easypoxy on extremely humid days (90°+ RH) or when rain is threatening. Do not apply in the late afternoon when working outdoors as the wet film may be adversely affected by dew. When working in cooler temperatures be sure the air and surface temperatures will remain at or above 50°F for at least 8 hours after application. Approx. Gallons of coverage: 600 sq.

Surface Preparation
Surface must be free of dirt, loose paint, rust, oil, grease, wax, soap and any other foreign matter. Clean painted areas by washing with a solution of 2 cups household ammonia per gallon of water and rinse well. Remove existing mildew with household bleach instead of ammonia.

Disclaimer: Charts apply to Interlux products only. The information provided is not intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot take responsibility for any actions as a result.

The performance of marine paint on many factors outside the control of iboats.com, including surface preparation, proper application, and environmental conditions. Therefore, iboats.com cannot guarantee this product's suitability for your particular purpose or application.

By purchase or use of this product, buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at iboats.com's option.

Average Customer Review for EZ-Poxy, Burgundy, Quart - Pettit Paint
Full StarFull StarFull StarFull StarFull Star
Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull Star
easypoxy
by George from St Charles, Missouri on August 13, 2013
Covers nice and smooth great paint
(0 of 1 people found this review helpful)
Was this review helpful?
Q:
Can you put easypoxy over rustlok 6980?
A:
Yes, you can put the easypoxy over the rustlok 6980.


Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies