Attwood Universal Tank Fittings

Best gas connector ever made. I give it a 10 out of 10.

I have three tanks for my boat and bought three male tank fittings and a female line fitting. I went on a thousand mile trip and had a lot of experience with these fittings before I replaced them out of fear of the danger of using them. #1 - they allow some gas to escape when ever disconnecting the line from the tank. # 2 and the real fearful part - the male tank fitting does not always seal and on a number of times I had gas leaking from this fitting when the tank became slightly pressurized, like when carrying tank to boat after filling it and the sloshing in tank caused some pressure build up. Gas was coming out of the male fitting!!! Other times I would smell gas in the cockpit where I stored the tanks and I traced it back to the fittings. This scared me enough that I replaced all the fittings with the old proven style. Major learning moment for me.

IBoats, I sent you an email and you failed to respond. I advised you that you are not selling what the picture depicts. What you are showing in this photo is exactly what I needed because it is "threaded" on one side. You sent me a male sprayless connector "slip on." Thank you Rich

- use it to change from 1 (6) gallon tank to another. This way at the end of the season I can dump the left over gas into my truck and not worry about "old" ethanol gas.

2 out of 4 of the male connectors failed. They continued to spray gas from pressure in the tank due to heat build up. I think the ball bearing seat was failing. I am going back to Johnson connector which I had always used before trying these. But I bought into the advertising about no spray when you connect the tank. The tanks not only sprayed when connecting / un-connecting but also 2 out of 4 continued to spray when no hose was connected. this caused unsafe boating conditions until I vented the cap by unscrewing it to remove the pressure. Why have an EPA rated ventless tank if you have to unscrew the cap. I will be working with the iboats rep to see what we can do about returning these used parts.

EZ Fast Just What I Wanted

Cant rate your product since I have not yet received your product

I really only needed half of this connection for a second tank but at least now I have the other half in case I ever need it. Was easy to order and got here in just a few days.

works very good

Replaced all my old Mercury fittings going to the fuel tank.No more"squirt"when disconnecting.Very pleased with the rapid response and resonable shipping.Maybe they will make one from metal for longer durability.

Just received 3 of these to replace Tank and 2 fuel line fittings. Looks like they will work great, just a little concerned about the plastic used and how durable this product will be. Gas tanks in an open boat take plenty of punishment so only time will tell. Will report back after this summer.

this commector will allow me to easily switch from one tank to a spare tank I don't have to mess with a gas can and refilling, just take my spare along