13 X 17 HUSTLER 4-Blade ALUM 2143 1730

Ordered a new prop from a local store and it was wrong!! Went to I boats and ordered the correct prop, got it in 2 days perfect fit great price!

This is a back up prop as I had to get one right away for a trip, so I will keep this until needed. But it looks great!

proforms as expected

good

I had issues getting the prop on at first, but I emailed them and they emailed right back showing me my mistake! Further, their prop exchange is fantastic. Most places (unreasonably, in my opinion) won't give you *ANY* support the minute the prop touches water. Turning Point saw that I had over-propped my boat and has their exchange program so I can get something with less pitch that fits me better.

Boat gets out of the hole like never before, turning control is much better and runs the same top speed as it did with the 3 blade 17 pitch it replaced.

I purchased the aluminum model to try the 4 blade performance verses the 3 blade. Very good results. the 4 blade has a very good hole shot and maintains the boats plane. Much better handling in turns as well. No cavitation at all and no decrease in RPM. Top end speed didn't change. I'll now go ahead and purchase the same prop in stainless. I have a 2018 Bass Tracker 175 pro team with 75 hp 4 stroke Mercury.

Good product - Easy to install - Simple instructions

The prop and hub are great Outboard runs perfect with it

Great prop and hub Can’t beat the price and it runs great on my boat Thanks

the new prop looks great, can't wait to try on my boat. Looking to get a better performance this summer. Installation looks easy. Thanks for great service.

working great with the 500 hub kit, easy installation and easy read instructions.

I'm running a 1976 23' sleekcraft Exec with twin Johnson loopers 70hp on a 24" setback mount 24" apart, both clockwise rotation. I've run a set of 14x17 with ventalation over rev and13x15 with over rev only at w.o.t. Used the prop wizard and it confirmed I was close on my choices and suggested they're 13.25x17x4 blade or 13.5x19x4 I purchased the former! (WOW) the same top speed 37mph but it never ventalates or even try's! The boat has a higher cruise speed at 2/3 throttle comes on plane faster and will stay there down to 14mph. It's never had a torque issue be it steering or yawing to one side with this setup and still doesn't ! but I swear its just a better ride and my hustlers never loose bite on this custum application. TURNING POINT FOREVER

Haven't had a chance to get the boat on the water, but my last boat had a 4 blade prop that outdone the 3 blade hands down. I don't see why this one won't either. Looks well made.

Great replacement for my 3 blade

I love the 4 blade props but it was the wrong pitch. I went from a 3 blade prop with a 17in pitch to a 4 blade 17in pitch because I read that I could use the same pitch if I had a power trim. Didn't work. I lost 15rpm's, around 10mph and no power coming out of the hole so I have since ordered another prop with only a 15in pitch. I can use the same hub kit so I'm only out the price of the prop as long as this one works. We are going on vacation next month so I'll let you guys know when I write a review on the other prop

I purchased a new prop for my outboard from iboats.com. the prop was exactly what I was looking for, it arrived in an extremely short period of time, and has performed to all of my expectations.

This prop does exactly as the ads said and what was needed. Very good buy from iboats.

We went from 3200rpm to 4500rpm with this prop. Top speed and the steering gain was massive... Great price for an EXCELLENT prop.

Great prop the hustler 4 blade is a notch above in every aspect over my previous quicksilver three blade handles my 1860 f and f like a dream with better hole shot, cornering and it gaind me sum speed from thirty seven to four two mph my f and f will never see another three blade prop as long as I own it.

This prop replaced a 13x17 4 blade spitfire. I thought the quarter inch larger diameter would reduce the RPM just enough to stop hitting the rev limiter, without increasing the pitch by two inches with the 400RPM redustion in engine speed. This prop returned more than expected. The Hole shot is far superior because of the performance venting, turning at high speed is sharper without cavitation. The engine can be trimed higher without ventilation and RPM was reduced just enough to not hit the rev limiter and keep the engine in the high end of it's recomended operating RPM. I have been boating over fity years and twenty boats, this is the first prop I put on a boat with no compromises. Boat, engine and prop came together perfectly for the first time ever. I am a happy boater.

Install on my 2011 4 stroke 75 hp Mercury. Prop fit well on shaft. Unfortunately winter season has come and will be unable to try prop for this year. Will have to see about performance in 2015 fishing season.

Works exactly as expected. Good value.

Works very well on my boat.

First, let me say that as far as Aluminum propellers go, these Turning Point Hustlers seem to be very high quality. The problem for me is that I have yet to find the proper propeller for my boat/motor even AFTER a lengthy telephone session with one of their senior techs. The stock prop on my Force 120 is a 3 bladed 21 pitch, but the first submitted recommendation (an extra service that Turning Point offers to pick the right prop) recommended a 4 bladed 17 pitch. Thanks to a friend who had experience with Force he wisely advised me to send that one right back and go with at least the next pitch size. iboats was great in returning it but the replacement, a 4 bladed 19 pitch is still not right. I'm going to give a 3 bladed a try now. Not so happy with the performance of the 4 bladed models.